Rubber stamps come in two forms – mounted and unmounted – and unmounted rubber stamps, either consists of just the die, or the die already adhered to the cushion. In this article, we’re going to look at each type of rubber stamp and how it’s used.
A wood-mounted rubber stamp has three-completely different parts – the die, the cushion and the block
The blocks for mounted stamps are traditionally made of wood. The wood is typically formed – making it easier to grip. You may usually find a duplicate of the stamp image on the block itself which makes it easy to establish what the image on your stamp is.
It is pretty common that as you’re stamping, the wood block will get stained with ink. While it impacts the outward look of the stamp, it would not affect how it works at all. If that bothers you then you may protect the wood by painting it with a coat of clear varnish.
The cushion sits in the course of the stamp – and is the padding between the block and the die. The aim of the cushion is to assist distribute the pressure as you stamp, helping to make sure a clear and constant image. Generally with use or over time you could notice the cushion start to come back loose from the stamp – this is definitely repaired with glue.
The die is what contains the actual image and it is made from rubber. A die that has good depth – in different words, the distance between the raised portion – which is the image – and the flat portion, will help ensure clearly stamped images.
Wood-mounted stamps are typically sold either individually or in sets, and in completely different ways. You can buy them already assembled – with the rubber mounted onto a cushion, and then mounted onto a block. Or, some companies, corresponding to Stampin’ Up!, sell them un-assembled – the block, image sticker and rubber die come separately.
Unmounted stamps are merely the die part of the stamp.
They’re sold in a variety of completely different ways. First off, you can buy just the die, or the die mounted to a cling foam cushion.
In addition, you can buy unmounted rubber stamps each reduce and un-reduce – which simply refers to whether or not the rubber is trimmed near the raised image or not.
Wood-mounted stamps are essentially ready to make use of – all you want is your ink and your paper and you’re ready to stamp. With unmounted stamps it’s worthwhile to have an acrylic block in order to achieve your best stamped results.
If you have any issues about in which and how to use creative rubber stamps, you can call us at our page.